Patch ID OSF350-195 for V3.2CPatch IDs for V3.2E and V3.2F should be available soon. There is no known reason why the Patch ID OSF360-350195 won't work on these releases, but such use is not officially supported by Digital. This patch kit will not be needed for V3.2G when it is released.
Patch ID OSF360-350195 for V3.2D
From firstname.lastname@example.org (Jeffrey Mogul) Organization DEC Western Research Date 30 May 1996 00:50:25 GMT Newsgroups comp.unix.osf.osf1 Message-ID <email@example.com> Subject Re: Web Site Performance References 1 In article <skoogDs54BH.9pF@netcom.com> firstname.lastname@example.org (Jim Skoog) writes: >Where are the performance bottlenecks for Alpha AXP running the >Netscape Commerce Server 1.12 with high volume internet traffic? >We are evaluating network performance for a variety of Alpha AXP >runing DEC UNIX 3.2C, which run DEC's seal firewall and behind >that Alpha 1000 and 2100 webservers. Our experience (running such Web servers as altavista.digital.com and www.digital.com) is that there is one important kernel tuning knob to adjust in order to get good performance on V3.2C. You need to patch the kernel global variable "somaxconn" (use dbx -k to do this) from its default value of 8 to something much larger. How much larger? Well, no larger than 32767 (decimal). And probably no less than about 2048, if you have a really high volume (millions of hits per day), like AltaVista does. This change allows the system to maintain more than 8 TCP connections in the SYN_RCVD state for the HTTP server. (You can use "netstat -An |grep SYN_RCVD" to see how many such connections exist at any given instant). If you don't make this change, you might find that as the load gets high, some connection attempts take a very long time. And if a lot of your clients disconnect from the Internet during the process of TCP connection establishment (this happens a lot with dialup users), these "embryonic" connections might tie up your somaxconn quota of SYN_RCVD-state connections. Until the kernel times out these embryonic connections, no other connections will be accepted, and it will appear as if the server has died. The default value for somaxconn in Digital UNIX V4.0 will be quite a bit larger than it has been in previous versions (we inherited this default from 4.3BSD). Digital UNIX V4.0 includes some other performance-related changes that significantly improve its maximum HTTP connection rate. However, we've been using V3.2C systems to front-end for altavista.digital.com with no obvious performance bottlenecks at the millions-of-hits-per-day level. We have some Webstone performance results available at http://www.digital.com/info/alphaserver/news/webff.html I'm not sure if these were done using V4.0 or an earlier version of Digital UNIX, although I suspect they were done using a test version of V4.0. -Jeff
---------------------------------------------------------------------------- From email@example.com (Jeffrey Mogul) Organization DEC Western Research Date 31 May 1996 21:01:01 GMT Newsgroups comp.unix.osf.osf1 Message-ID <firstname.lastname@example.org> Subject Digital UNIX V3.2C Internet tuning patch info ---------------------------------------------------------------------------- Something that probably few people are aware of is that Digital has a patch kit available for Digital UNIX V3.2C that may improve Internet performance, especially for busy web servers. This patch kit is one way to increase the value of somaxconn, which I discussed in a message here a day or two ago. I've included in this message the revised README file for this patch kit below. Note that the original README file in the patch kit itself may be an earlier version; I'm told that the version below is the right one. Sorry, this patch kit is NOT available for other versions of Digital UNIX. Most (but not quite all) of these changes also made it into V4.0, so the description of the various tuning parameters in this README file might be useful to people running V4.0 systems. This patch kit does not appear to be available (yet?) from http://www.service.digital.com/html/patch_service.html so I guess you'll have to call Digital's Customer Support to get it. -Jeff DESCRIPTION: Digital UNIX Network tuning patch Patch ID: OSF350-146 SUPERSEDED PATCHES: OSF350-151, OSF350-158 This set of files improves the performance of the network subsystem on a system being used as a web server. There are additional tunable parameters included here, to be used cautiously by an informed system administrator. TUNING To tune the web server, the number of simultaneous socket connection requests are limited by: somaxconn Sets the maximum number of pending requests allowed to wait on a listening socket. The default value in Digital UNIX V3.2 is 8. This patch kit increases the default to 1024, which matches the value in Digital UNIX V4.0. sominconn Sets the minimum number of pending connections allowed on a listening socket. When a user process calls listen with a backlog less than sominconn, the backlog will be set to sominconn. sominconn overrides somaxconn. The default value is 1. The effectiveness of tuning these parameters can be monitored by the sobacklog variables available in the kernel: sobacklog_hiwat Tracks the maximum pending requests to any socket. The initial value is 0. sobacklog_drops Tracks the number of drops exceeding the socket set backlog limit. The initial value is 0. somaxconn_drops Tracks the number of drops exceeding the somaxconn limit. When sominconn is larger than somaxconn, tracks the number of drops exceeding sominconn. The initial value is 0. TCP timer parameters also affect performance. Tuning the following require some knowledge of the characteristics of the network. tcp_msl Sets the tcp maximum segment lifetime. This is the maximum lifetime in half seconds that a packet can be in transit on the network. This value, when doubled, is the length of time a connection remains in the TIME_WAIT state after a incoming close request is processed. The unit is specified in 1/2 seconds, the initial value is 60. tcp_rexmit_interval_min Sets the minimum TCP retransmit interval. For some WAN networks the default value may be too short, causing unnecessary duplicate packets to be sent. The unit is specified in 1/2 seconds, the initial value is 1. tcp_keepinit This is the amount of time a partially established connection will sit on the listen queue before timing out (e.g. if a client sends a SYN but never answers our SYN/ACK). Partially established connections tie up slots on the listen queue. If the queue starts to fill with connections in SYN_RCVD state, tcp_keepinit can be decreased to make those partial connects time out sooner. This should be used with caution, since there might be legitimate clients that are taking a while to respond to SYN/ACK. The unit is specified in 1/2 seconds, the default value is 150 (ie. 75 seconds). The hashlist size for the TCP inpcb lookup table is regulated by: tcbhashsize The number of hash buckets used for the TCP connection table used in the kernel. The initial value is 32. For best results, should be specified as a power of 2. For busy Web servers, set this to 2048 or more. The hashlist size for the interface alias table is regulated by: inifaddr_hsize The number of hash buckets used for the interface alias table used in the kernel. The initial value is 32. For best results, should be specified as a power of 2. ipport_userreserved The maximum number of concurrent non-reserved, dynamically allocated ports. Default range is 1025-5000. The maximum value is 65535. This limits the numer of times you can simultaneously telnet or ftp out to connect to other systems. tcpnodelack Don't delay acknowledging TCP data; this can sometimes improve performance of locally run CAD packages. Default is value is 0, the enabled value is 1. Digital UNIX version: V3.2C Feature V3.2C patch V4.0 ======= ===== ===== ==== somaxconn X X X sominconn - X X sobacklog_hiwat - X - sobacklog_drops - X - somaxconn_drops - X - tcpnodelack X X X tcp_keepidle X X X tcp_keepintvl X X X tcp_keepcnt - X X tcp_keepinit - X X TCP keepalive per-socket - - X tcp_msl - X - tcp_rexmit_interval_min - X - TCP inpcb hashing - X X tcbhashsize - X X interface alias hashing - X X inifaddr_hsize - X X ipport_userreserved - X - sysconfig -q inet - - X sysconfig -q socket - - X